Last Updated on February 22, 2025 by Caesar
Setting up a storage water heater guarantees a consistent supply of hot water, which is beneficial for homeowners. However, some critical steps need to be followed within the installation process, and it is very important to know them. It does not matter if it is your first time installing or replacing it; efficient work can be done for storage water heater installation services. For a hassle-free installation, consider seeking storage water heater installation services from professionals specializing in the process.
Step 1: Assessing the Location
This phase relates to ensuring everything is ready for the installation work. The first step is finding the optimal location for the storage heater. An ideal site will have separate ducts that lead to the primary electricity and water lines. Remember, the room needs to be of proper size, and the floor must be aligned to support the unit firmly. Getting a consultant may increase your savings if it facilitates your planning. For more info, visit our services at https://www.plumbersingapore.org/our-services/.
Step 2: Removing the Old Water Heater
The old water heater must be removed with care to avoid any damage. After this procedure, the new water heater will be set up without operational hazards. The old heater can be removed in this way:
- Disconnect the power: If you are using electric water heaters, make sure the power is disconnected at the electric breakout box. For gas-powered water heaters, the gas must also be cut off to prevent leaks.
- Stop the Inflow of water: You can prevent the tank from inflating by turning off the water main valve.
- Remove the water: Opening the drain valve will permit water to exit the heater. This will stop any overflow as the plumbing fittings will be removed.
Step 3: Putting the New Water Heater in Position
After tightening the water heater, ensure that it does not shift positions. Then, install the inlet pipe on the water heater and join the hot outlet pipe on the distribution system. If it is an electric model, make sure to read the manufacturer’s manual before connecting the water heater.
Step 4: Testing and Checking for Leaks
Ensure that all connections are complete before proceeding. The water heater process is now at the testing stage. Open the valve on the water supply line and let the tank fill. While the water fills, watch the areas around the connections for signs of leakage.
Step 5: Insulating and Final Checks
Lastly, it is important to cover the elements of the water heater so that no heat escapes and do the necessary final checks. Lock all the connections, set the thermostat to the chosen value, and turn on the power. Now, the new storage water heater can be used.
Maintenance Tips for Your New Water Heater
A good storage water heater is expensive to purchase, thus requiring one to do regular maintenance checks. The following suggestions will help you properly maintain your heater:
- Flush the tank annually: If this is not done, efficiency will be reduced due to sediment buildup. Building up tanks will reduce the chances of sediment problems arising.
- Checking the anode rod: The anode rod guarantees protection from roughness within the tank, but like any other item within the system, it should be routinely replaced.
- Inspect for leaks: On a routine basis, inspect all sides of the entire unit and pipes so that if there are any leaks or moisture problems, damage can be avoided.
By undertaking these easy maintenance strategies, your water heater will undoubtedly furnish you with heated water for years to come.
Why You Should Look Into Hiring Professionals?
Even though changing out a storage water heater seems like a manageable DIY project, there are benefits to hiring professional storage water heater installation services. This job is best completed by a licensed plumber because they have the tools and skills to install the unit properly. They will also have knowledge of the local regulations and codes to ensure that the installation is completed correctly and safely.
